Stick It! Cool Melt Glue Gun

Product Information

Lay your surfaces to be glued down flat on your work surface and position the nozzle of the gun at the start of your first surface. The lower temperature glue guns are more suitable for more delicate items such cloth/material, paper, card etc. These guns tend to be used more by hobbyists and those involved with arts and crafts. In terms of drying time, you might be asking yourself; How long does it take hot glue to dry? In answer, allow at least 5 minutes before moving anything to ensure the glue has time to set. Yes, you can use a low temperature glue gun on balloons without popping them, making it a suitable tool for various balloon-related decorations. Low temp glue guns operate at a lower temperature compared to high temp glue guns, which makes them safe and easy to use on heat-sensitive materials like balloons. Why buy from gluegunsdirect.com? With the glue applied, position the surfaces together firmly making sure everything is lined up correctly.

When in use and cooling down, always ensurethe glue gun is resting on its stand, with the nozzle pointing downwardsApply some gentle pressure to the trigger until the glue starts to flow freely, at which point move the gun along the length of the surface, easing the trigger off as you approach the end. With these guns you get the best of both worlds, but this feature does come with an additional cost. In reality the type of glue gun for you will be dictated to you by the type of job you need it for. High melt glue guns have a wider selection of adhesive formulations to choose from. Covering off the bonding of more challenging materials like polypropylene, plastics, ABS, acrylics and even metals. Try our Glue Selector

Pieces of timber successfully joined together and left until glue has fully cured Step 6 – Finishing up Wipe off any dust or debris produced by the sanding and you should now be ready to go. Step 4 – Start Gluing If there is any surplus glue then it’s best to leave this until it’s hardened off at which point you can scrape it off with a knife or scraper.

In the case for the gun we are using in this example, the manufacturer states to leave the gun for 5 minutes, but as mentioned, refer to your manufactures user manual for specific times. Whether you need to repair a broken piece of furniture, you want to add jewels to a plain headband, or the strap to your favourite leather bag is falling off – a glue gun is the perfect tool to help. Hot glue guns can sometimes be an impulse buy, but it’s worth putting serious thought into which kind you want before dropping one in your basket. Keep the following in mind and you’ll end up a happy customer. Use

Most glue guns heat up at the tip so you’ll know it’s up to temperature and ready when you squeeze the trigger and the glue starts to flow. How to Use a Glue Gun – A Step by Step Guide Low melt glue guns are safe and easy to use. Low melt glue guns reduced risk of burns due to the adhesive being applied at a lower temperature and are commonly used for bonding heat-sensitive materials like polystyrene which a hot melt adhesive would melt! Also used extensively in arts and crafts and schools.

With everything now prepared it’s time to apply some glue. Before applying the glue straight on to any surfaces it’s a good idea to do a test first. Any tool handled carelessly or incorrectly can cause painful and sometimes permanent injury, and a glue gun is no exception. With that in mind, please take a minute to read this safety advice for the next time you or a loved one uses your new glue gun.